| Step | | Procedure & Parts & Tools |
| 1 |
|
FOLD THE HANDLE DOWN OVER THE MOTOR. FLIP THE MACHINE OVER.
|
| 2 |
|
REMOVE THE 9 BOLTS HOLDING THE BOTTOM WEIGHT.
| Screwdriver-phillips |
|
|
| 3 |
|
REMOVE THE 5 BOLTS HOLDING THE BRUSH HOUSING ASSEMBLY
|
| 4 |
|
REMOVE THE 5 SCREWS HOLDING THE COVER.
| Torx T25 |
|
|
| 5 |
|
PULL THE COVER OFF THE MACHINE.
|
| 6 |
|
LOCATE THE SOLUTION PUMP.
|
| 7 |
|
PUSH IN ON THE HOSE CONNECTOR AND PULL THE HOSE FROM THE PUMP TO DISCONNECT IT.
|
| 8 |
|
PULL THE 2 WIRES FROM THE SOLUTION PUMP.
|
| 9 |
|
PULL THE GREEN SOLUTION HOSE TO DISCONNECT IT FROM THE PUMP.
|
| 10 |
|
FLEX THE RUBBER FLAPS AWAY FROM THE PUMP AND REMOVE THE PUMP.
|
| 11 |
|
REVERSE STEPS 1 THRU 10 TO INSTALL A NEW SOLUTION PUMP. WHEN INSTALLING A NEW PUMP, THE SMALLER THINNER END OF THE PUMP POINTS TOWARD THE BACK WHEELS. SEE PICTURE I N STEP 10.
|